Introduction
Use this Quick Start guide as a reference to install and configure.
will step you through hardware installation and configuration.
Wireless Connection Using Internal Soft AP
1.
Once power and antenna is connected, turn on the
EAD-02W SP.
By default the Soft AP mode is enabled with a default SSID of
“
.
Where
are the last six characters of the unique xPico Wi-Fi MAC
address. This MAC Address is available on the box label. For example if
the MAC Address on label is
then the SSID would be
.
2.
Using the Wi-Fi Connection Manager of your connecting device
the above SSID should be presented as an available connection
choice. Select the SSID and follow the device connection
manager instructions to continue to connect. The default
security for xPico Wi-Fi SoftAP is WPA2 and the passphrase is
. These defaults can be changed through the
configuration web manager after the initial connection has been
established.
3.
When prompted enter the passphrase to complete the Wi-Fi
connection authentication process. With a Wi-Fi client set to the
above parameters, your device can connect directly to the xPico
Wi-Fi Soft AP.
4.
Open a standard browser (E.g. Internet Explorer®, Firefox®,
Chrome™, Safari® etc.) and in the address field of the browser
enter the following URL;
or alternatively use
as the IP Address
.
Содержание EAD-02W SP
Страница 1: ...EAD 02W SP Quick Start ...