Ausgabe 2011
ENGLISH 13
Unit installation
Install the compressor on a level surface in a well-ventilated room with adequate space.
Room temperature should not exceed 35°C.
1.
Remove the safety padding where appropriate (not illustrated)
2.
Connect the paint sprayer to the compressor using the connection hose.
3.
To connect a second instrument, remove the screw on the water separator
Beginning of operation
Connect the compressor to the power supply system. Turn the on/off switch to I (on)
The compressor is fitted with an automatic shut-off switch. The shut-off switch automatically deacti-
vates the motor after it has built up the maximum pressure required.
The motor is automatically reactivated when the pressure reaches three bar in the event of air being
removed from the pressure tank.
Setting the working pressure
The desired working pressure can be set with the pressure regulator. The working pressure is indica-
ted on a pressure gauge
1. Pull the knob upwards.
2.
Increasing the pressure:
Turn the knob in a clockwise direction.
Reducing the pressure:
Turn the knob in an anticlockwise direction.
3. Push the knob downwards again after the desired working pressure has been set.
2
3
1
2
3
