14
Downloading a book to Sparkup
1. Connect to your SPARKUP drive.
2. Go to www.sparkupreader.com and follow the on-line instructions.
3. Save the SPK file you have downloaded to the SPARKUP drive.
4. Check that you see the new SPK file inside the SPARKUP drive.
5. Turn off Sparkup by pressing and holding the center key. Sparkup will play a sound
and turn off.
6. Disconnect the USB cable, attach Sparkup to the printed book, turn it on, and enjoy
the recording!
Browsing and organizing your library of recordings
All of the books you have recorded will appear in your SPARKUP drive as BOOK0001.SPK,
BOOK0002.SPK, etc. You can easily rename them as follows.
1. After connecting to your SPARKUP drive (device is on), press the center key (do not
hold it, just press shortly).
2. You will hear a message (e.g., “Book One”), and then the recording of the front cover
of this book (in this case, of BOOK0001.SPK). You can now rename BOOK0001.SPK
