Sparklan WVTR-141, Руководство пользователя

Страница: 54 / 55

5.3 How can I make a 3-way conference call?
Making 3-way conference call is pretty similar to making phone call; just follow the
steps below, and your 3-way conference will be there for you.
1. Make a phone call to the first phone number.
2. After the call is established, press the Flash button. You will hear the Dial tone,
and then make the other phone call to the second phone number.
3. When the second call is established, press the Flash button again. Then, all
the 3 parties can enjoy the conference call.
5.4 How can I transfer a call to others?
For using “Blind Transfer” function, you just need to dial "
＊
"+ " 1 " to hold the
current call, and then dial the extension number where you like the call to be
transferred.
For using “Ringing Transfer” function, you just need to press the Flash to hold the
current call, and then dial the extension number where you like the call to be
transferred. After hearing the ring back tone, press pound key “ # ” to transfer.
For using “Consultant Transfer” function, you just need to press the Flash to hold
the current call, and then dial the extension number where you like the call to be
transferred. After the conversation has established, press pound key “ # ” to
transfer.
5.5 Why can’t I login to the WIFI-ATA?
Make sure you set the correct IP address of WIFI-ATA. If you’ve confirmed the
WAN IP address of WIFI-ATA is correct but you still can not access the webpage
of WIFI-ATA from the WAN side, you probably did not enable “Web Server Access
on WAN”. In this situation, you can only access the webpage from the LAN side.
5.6 Why can’t I access the Internet?
Please check which network mode, “Bridge Mode”, “Gateway Mode”, or “WISP
mode” your WIFI-ATA is set and check if the Ethernet ports are used correctly.