the maximum permissible gain indicated. Antenna types not included in this list that
have a gain greater than the maximum gain indicated for any type listed are strictly
prohibited for use with this device.
Unique antenna connector (RP-SMA) must be used on the Part 15 authorized
transmitters used in the host product.
Antenna Type Antenna Model
Maximum Gain (dBi)
Remark
2.4 GHz
5GHz
Dipole
AD-103AG
2.02 dBi
2.03 dBi
Dipole
AD-302N
3.14 dBi
2.73 dBi
Dipole
AD-303N
3.14 dBi
3.24 dBi
Length of Antenna cable:150mm
Connector type of Antenna cable: I-PEX/MHF1 to RP-SMA(F)
If the FCC identification number is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed
must also display a label referring to the enclosed module. This exterior label can
use wording such as the following: “Contains Transmitter Module FCC ID: RYK-
WPEB265AXIBT” Or “Contains FCC ID: RYK-WPEB265AXIBT”
The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC
transmitter rules) listed on the grant, and the host product manufacturer is
responsible for compliance to any other FCC rules that apply to the host not
covered by the modular transmitter grant of certification. The final host product still
requires Part 15 Subpart B compliance testing with the modular transmitter
installed.
