1.
The module does have buffered modulation / data inputs.
2.
The module does regulate its own power supply
3.
The module does have a permanently attached antenna.
4.
The module can be tested as a stand-alone device.
5.
The module is labeled with the proper FCC ID, and labeling instructions are
provided to OEM end users for external product labels.
6.
The module does have instruction for proper use.
7.
The module does meet the FCC RF regulations.
8.
The module does have its own RF shielding.
III. FCC Label instructions
The outside of final products that contain a WPEA-111N/W device must display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: TVE-0600101” or “Contains FCC ID: TVE-0600101”.
Any similar wording that expresses the same meaning may be used.
The label for the WPEA-111N/W module is listed below:
