Congratulations! You’ve just finished setting up the configuration for our
random sound player!
Programming the system
Programming the system is done via your headphone output jack. Plug one
of the included 3.5mm cables into the headphone jack on your computer,
smartphone, or tablet, and plug the other end into the “Program” jack on the
Director Board.
Supply power to the Director Board via the micro USB jack on the end of
the board, then hold down the RST button. Hold down the PROG button,
and release the RST button. After a moment, you should see the LED on
the board blinking. It should blink three times, pause, blink three times,
pause, repeatedly. Turn your system’s volume up all the way, then touch or
click the “Install Script” button at the bottom of the screen. That will pull up
the page below.
Page 12 of 16
