Having trouble seeing everything in the image? Click on it for a larger view.
Finally attach the Qwiic Motor Driver's motor power screw terminals to the 2 pin screw terminal for
5V
and
Ground
on the Qwiic pHAT using the included 6 inch M/M jumper wires. We recommend using one black wire (ground) &
one red wire (power), but you can use any included color your head desires.
Having trouble seeing everything in the image? Click on it for a larger view.
Check the battery power on the USB pack by pressing the power button on the side of the battery. Four dots
means it is fully charged. The Jetson is fairly power hungry. We recommend only powering up your SparkFun
JetBot with a fully charged battery pack.
Use the included 6 inch USB Micro-B Cable to connect the Jetson Nano Dev Kit to the battery pack.
