manualshive.com logo in svg

sparkfun DEV-13714, Руководство по подключению

Поделиться
Скачать
sparkfun DEV-13714 Скачать руководство пользователя страница 10

{

    digitalWrite(LEDPin, LOW); 
  } 
 
  delay(250); 
} 

Getting Started with PSoC Creator

If you want to move beyond the basics, you’ll need to install Cypress’s PSoC Creator IDE. It’s free, with no code
size limitations, although Cypress does ask that you register before downloading.

It is, sadly, Windows only.

We’ll go through a very simple project here, just a step more involved than a normal “blink” example.

Connecting the Board

For programming and debugging within PSoC Creator, you’ll need to connect the board via the “Debugger” USB
port. The driver should have been installed as a part of the Creator install process. If not, you can find them in the
Creator installation directory. If you find driver installation problematic under Windows 8, we have a tutorial to help
with that.

There’s no need to connect the “Target” port, unless you are actually creating a project that uses USB, which is
beyond the scope of this tutorial.

Creating a Project

This is what you’ll see when you launch Creator. To start a new project, you can either click the “Create New
Project…” link on the Start Page, the “New” button in the menu bar, or open the “File” menu and choose
“Project…” in the “New” submenu.

Содержание DEV-13714


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды