Qwiic Shield for Photon
Note:
The shield includes headers, but they are not pre-soldered onto the board, so some assembly
will be required when putting the shield together. The image below shows the shield after the header
has been soldered to the PCB to.
The Qwiic shield for the Particle Photon also includes 4x Qwiic connect ports, a prototyping area,
and buses for 3.3V and ground. However, they are much smaller. The Photon is a 3.3V system and
assumes that you are using 3.3V devices so logic level conversion is not included in the design. If
you are using a 5V based I
2
C device, be sure to grab a
bi-directional logic level converter
.
