Sparker DC-CDIP 2 RACE, Руководство пользователя

Страница: 11 / 11

Change from potentiometer
- This field displays the corrections of individual values derived from the voltage of the correction
potentiometer.
- The advance displays the possible advance correction.
- The starting limiter displays the possible correction of the starting limiter.
- The gear-shift pilot light displays the possible correction of the gear-shift pilot light.
- The acceleration threshold displays the possible correction of the acceleration threshold.
COM - Displays the current communication channel.
Common monitor
- The always-visible values are displayed here.
RPM - The current value of "revolutions per minute".
TP - The current value of "throttle opening".
Advance - The current value of "ignition advance" which is currently being executed.
U - The current value of "controller supply voltage".
Blocking - The result of the blocking function.
Speed - The current value of the vehicle's speed (it must be correctly defined on the "Gear" tab).
Speed gear - Display of the currently engaged speed gear ("Gear" tab).
Crankshaft sensor 1 - Shows whether pulses are being received via the "pickup 1" input.
Crankshaft sensor 2 - Shows whether pulses are being received via the "pickup 2" input.
Measured servo - The current value of "servodrive sensor voltage".
Required servo - The current value of "calculated voltage requirement for servodrive".
Programming after change - Activation of the "programming after change" function. If it is selected, any
changes in the software application will be immediately saved in the unit.
1