35
MAXITROL GV60 CONTROL SYSTEM
Current
temperature
(F or C)
Period
start or end
(Temp, Timer
)
Battery status
Display Overview
Note: In the TEMP or TIMER modes, the remote
handset senses the room temperature and adjusts the
flame accordingly.
To communicate, the handset should be within 15
feet (4.5 meters) of the fireplace.
Set
(scrolls
through
modes and
settings)
OFF
(returns to set
mode, turns the
burner and the
pilot off)
Large flame
button
(flames up,
sets hours,
temperature)
Small flame
button
(flames
down and off,
sets minutes,
temperature)
Handset
sensor
Current
programmed
period (Timer)
Current time
(12 or 24 hour
clock)
Modes (Manual,
Temperature, Timer)
MANTEMPTIMER
Do not leave the handset on the hearth, mantel, or
on top of the fireplace.
Handset Overview
TO TURN ON APPLIANCE
TO TURN OFF APPLIANCE
When pilot ignition is confirmed, motor turns auto-
matically to maximum flame height.
CAUTION
On the valve, turn MAN knob on the ON, full
counterclockwise
position.
Simultaneously press the OFF
and (large flame) buttons
until a short
beep confirms the
start sequence has begun; re-
lease buttons.
Continuing beeps confirm the
ignition is in process.
Once pilot ignition is con-
firmed, there is main gas
flow.
After main burner ignition
the handset will automati-
cally go into manual (MAN)
control mode.
In standby mode: Press and
hold (large flame) button
to increase flame height.
Press OFF button.
When the pilot is off, it will take
2 minutes before it can be lit
again.
STANDBY MODE (Pilot Flame)
Press and hold (small flame) to set appliance at
pilot flame
FLAME HEIGHT ADJUSTMENT
