Sparc Nitewatch, Руководство пользователя

Страница: 4 / 6

7 6
2 Rudder stick (left stick) (Left/Right)
Moving the rudder stick left allows the helicopter to turn left; moving the stick right makes the helicopter turn right.
2
-1 Left turn
2 -2 Right turn
3 4
1
3
2 -1
2 -2
1 -1 1 -2
SP685
SP685
3 4
1
3
2 -1
2 -2
1 -1 1 -2
SP685
SP685
3 Elevator stick (right stick) (Forward)
Moving the forward stick up allows the helicopter to fly forward.
4 Search light button
Pushing the search light button above the power switch will turn the search light off and on.
3
Get Acquainted with the Helicopter
1
Slowly move the throttle stick up; the rotor starts rotating and the helicopter ascends. Since the ascending power var-
ies in proportion with how far you move the throttle stick forward, adjust the throttle stick (left) to make the helicopter
hover when it reaches a height of approximately 6 feet.
1 -1 Up
1 -2 Down
If the helicopter tends to spin one direction or the other, turn the adjustment knob on the transmitter to correct it.
1 - Adjustment knob
2
To move the helicopter down, move the throttle stick (left) back more slowly than when moving the helicopter up.
When the helicopter starts descending, hold the stick in its position. The helicopter will land gently by itself.
65´/20m
2
1 -3
4
3
SP685
SP685
SP685
3 While the helicopter is hovering, moving the Elevator stick (right) up allows the helicopter to fly forward. The helicopter
may experience a small descent as it flies forward. Slightly move the throttle stick up to correct it.
65´/20m
2
1 -3
4
3
SP685
SP685
SP685
4
After Use
Turn off the helicopter first, then turn off the transmitter. Be sure to retract the transmitter antenna.
5 The helicopter display base also functions as a helicopter landing pad. Installing 4 AA batteries (not included) will
allow the landing pad lights to function. To install the AA batteries, turn the base upside down. Remove the screws
securing the battery door. Insert 4 AA batteries, noting the correct polarity.
Replace the battery door and secure using the included screws.
Important
This helicopter is equipped with a feature for monitoring the battery level of the built-in battery. The LED lamp blinks if
the battery level becomes low. Turn off the switch when the LED lamp starts blinking.
Failure to do so may adversely affect the batteries, resulting in permanent damage.
65´/20m
2
1 -3
4
3
SP685
SP685
SP685