Spanset ULTIMA-X Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 10

Spanset ULTIMA-X Скачать руководство пользователя страница 5

INS_ULTIMA_Harness_2018695

31/03/2022

Page 5 of 10

ULTIMA

-

X Harness

Product Compatibility

PRODUCT COMPATIBILITY

Always ensure, via specific training or advise from a competent person, that the intended
application of PPE is compatible with the products used. It cannot be assumed that all combi-
nations of PPE will interact in a safe manner.

Pay particular attention to verify connectors are positioned and closed in such a manner that
any loading of the safety system does not incorrectly load the connector or has the potential to
operate the connector gate mechanism accidentally. Always ensure the connectors are orien-
tated to load in the primary axis.

This harness has been recommended for use (but not exclusively) with the following compati-
ble elements of PPE:

EN354

—

Restraint lanyard to front or rear attachment point.

EN355

—

Fall arrest lanyard to front or rear attachment points.

EN358

—

Work positioning systems to front or rear attachment points, and waist belt.

EN360

—

Retractable fall arrest systems to front or rear attachment points.

FOR FURTHER DETAILS OF PPE COMPATIBILITY, PLEASE CONTACT YOUR LOCAL SPANSET BRANCH.

ALL PPE CONNECTED INTO A SAFETY SYSTEM MUST CONFORM TO EN STANDARDS AND BEAR THE

‘CE’

LOGO. IF IN DOUBT,. SEEK ADVISE FROM YOUR LOCAL AUTHORITY OR THE MANUFACTURER, SPANSET.

«
...
3
4
5
6
7
...
»

Содержание ULTIMA-X











Отзывы:

Нет отзывов