spalina BT-62119M, Инструкция по эксплуатации

Страница: 9 / 28

DETAILS OF THE BATHTUB
EN
Product name Voltage Frequency Power IP Water pressure
Bathtub 220-240V~ 50Hz 1610W X5 0.2-0.6MPa
TECHNICAL DATA
• The floor should be able to sustain the weight.
• Install the bathtub according to the drawing
• Draining: A draining system shall be planned for the overflow. It’s
recommended to position the draining hole as shown in the below
drawing. If not, the draining hole shall be within 200mm around the
ideal position and the diameter shall be less than 50mm. (Point D in
the drawing)
• Maintenance zone: Please leave a space of 500mm or more around
the bathtub for future maintenance. Do not install any fixed objects in
this area. (Point E in the drawing)
• Electrical connection: Warning: connect the three conductors of the
supply cable to a connection box IPX5 in respecting the polarities as
following:
- Live: Brown
- Neutral: Blue
- Earth: Yellow/Green
• If you are not sure, it’s recommended to ask a qualified electrician
for help.
iNSTALLATION
1. Pillow
2. Water jet regulating knob
3. Water jet switch
4. Bubble switch
5. Light switch
6. Colored lamps
7. Drain hole
8. Backflow hole
9. Big water jet
10. Bubble nozzles
11. Small water jet
12. Metal edge
13. Glass panel
14. Side panel
9