Spagna Vetro SV200J-IM, Руководство пользователя

Страница: 9 / 9

1
）
Remove the filters see Pic.10
2
）
The carbon filters (pic.11) are located at both sided of the motor. Turn the charcoal
filters counter clockwise until they are removed from the body.
3
）
Apply reverse procedure to install the charcoal filter
Pic1
TROUBLESHOOTING
Symptom Solution
The range hood does not start.
●
Check if the hood is connected to the
electricity supply.
The range hood is not working
efficiently.
●
The fan speed is not set high enough.
●
The grease filter is dirty.
●
The kitchen is not ventilated well enough.
●
If the hood is set for recirculation, check if the
carbon filters needs to be changed.
●
If the hood is venting outside, check if ducting
and caps are not blocked.
The range hood has switched off
during operation.
●
The safety cut-out device has been tripped.
●
Turn off the hood and wait 2 min. for the
device to reset.
●
Note that if you have installed your range hood
too low, this will happen.
www.KitchenHoods.ca