spacewalker HOT-671, Руководство пользователя

Страница: 14 / 54

14
What does the Celeron™ Processor RM consist of
Figure 8
Figure 9
Install the Celeron™ Processor RM
Celeron™ Processor requires the Retention Mechanism (RM) to hold the base processor in the
S.E.P.P.
Following installation procedure will display how to install these mechanism. Please consult to
your supplier for the mechanism.
Retention Mechanism package consists of 2 sets separate parts.
Each set consists of one RM, two Posts and two lock pins.
Retention Mechanism (RM) -
Two Plastic Guides that hold the
S.E.P.P in the Slot 1 connector.
(Refer to Figure 8)
Post Pins -
Four Post pins are push into the RM's holes
to fix RM on the PCB.
Lock Pins -
Four Lock pins are push into the Post holes
to lock up RM on the PCB.
Place the mainboard on a workbench (not in a chassis). Be sure that the mainboard is bare
(that is, no SIMMs, cables, or cards are installed).
1. Finds out the Retention Mechanism (RM) Mount-
ing Holes of Slot 1 on HOT-671 main board.
(Refer to Figure 9)
2. Insert two Retention Mechanism (RM) face to face
on opposite side of the Slot 1.(Refer to Figure 9)
3. Insert four Post Pin through the RM to fix it to the
mainboard. (Refer to Figure 9)
4. Insert four Lock Pin through the Post Pin to lock
RM to the mainboard.(Refer to Figure 9)