HOT-613 User's Manual 5
Chapter
1
Introduction
CPU
Supports dual or single 180MHz or 200MHz Pentium™ Pro CPU on ZIF
socket 8.
Note : HOT-613 main board doesn't support older Pentium
™
Pro processors without
VID (Voltage Identification) supported
VRMs
Provide a VRM headers to insert a external VRM for secondary processor on dual
processors system.
Chipset
Features Intel's i440FX PCIset with super I/O subsystems.
Memory
Supports four 72-pin SIMMs of 4MB, 8MB, 16MB, 32MB, 64MB, and
128MB to form a memory size from 8MB to 512MB.
Supports Fast Page Mode (FPM), Extended Data Output (EDO), and
Burst Extended Data Output (BEDO) DRAM Module.
Supports Error Checking and Correcting (ECC) function, when using
parity DRAM modules can detect and correct 1 bit memory errors.
Cache Memory
Support Pentium™ Pro's built-in 256KB or 512KB level 2 cache so that
no external cache chips are required.
Power Management Function
Provides four power management modes : Full on, Doze, Standby, and
Suspend.
Supports Microsoft APM 1.2.
Provides EPMI (External Power Management Interrupt) pin
Expansions
32-bit PCI bus slot x 4
16-bit ISA bus slot x 3
Specification
