7. Electric Lock Connection
1. The external power supply must be used according to the lock.
2. The jumper must be taken off before connecting.
3. If different unlocking time is needed, change the unlock time on door
station by modifying the BIT-4 and BIT-5.
+
-
Take off the jumper
NO NC COM GND GND OPEN
CN3
1 2 3
SIP1
Exit button
-
+
+
-
Take off the jumper
NO NC COM GND GND OPEN
CN3
1 2 3
SIP1
Exit button
-
+
Power OFF to unlock type
Power OFF to unlock type
Magetic lock
Magetic lock
Take off the jumper
12V 300mA
+
-
NO NC COM GND GND OPEN
CN3
Exit button
Power ON to open
1 2 3
SIP1
Electric control lock
+
-
-
+
8. Specification
Power Consumption: 1W in standby, 5W in working
Unlock Power output: 12Vdc, 250mA
Unlock timing: 1s, 5s, 10s, 15s
Working Temperature: -20
℃
~ +55
℃
Power supply: DC 24V
The WEEE symbol (the crossed-out wheeled bin) using indicates that this product is not home waste. Appropriate
waste management aids in avoiding consequences which are harmful for people and environment and result from
dangerous materials used in the device, as well as improper storage and processing. Segregated household
waste collection aids recycle materials and components of which the device was made. In order to get detailed
information about recycling this product please contact your retailer or a local authority.
Produced in ChRL for: DMTrade Mikołaj Tomaszewski Wiśniowa 36; 64-000 Kościan, Poland
NIP: PL 6981681757 [email protected] Tel.: +48 697 222 052
