Page 6
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Power Box Stand
Power Box
This piece is now
attached at the base
of the elevator.
Elevator Power Box:
Attach
Power Box Stand to Power Box
before installing to base.
E
ELEVATOR & SHAFT INSTALLATION
Elevator Guard:
Attach 1 Elevator
Guard 1 to each of the 3 Elevator Rings.
NOTE:
The Marble
may fall out
if it enters
too quickly.
Shaft Connector:
Insert Shaft
Connector at the top of shafts and
push into shafts until secure.
Specific shafts indicated on pages 11
and 16 by:
Rotation arms:
Attach rotation arms to shafts. Pay close attention
to the placement and direction of the rotation arms on each shaft.
Rotation arms are composed of arm components from page 3.
Rotation Arm A
Rotation Arm B
Rotation Arm C
Secure rotation arm:
Turn
Arm Lock counter-clockwise
90° to secure arm.
Rotation arm assembly:
Insert
shaft into arm holder and insert
Arm Lock. To avoid damage, do
not force.
