Spacelabs 91390, Руководство по эксплуатации, Страница: 80 / 156

www.spacelabshealthcare.com 7 - 1 2
X P R E Z Z O N
A N D Q U B E
O
P E R A T I O N S
M
A N U A L
A
L A R M S
To adjust the volume levels for High, Medium, Low
Priority Alarms, Remote Alarm, Alarm Watch, and Key
tones
1 Touch Monitor Setup .
2 Touch the Audio tab.
3 Touch the tone that you want to set the volume for: High Alarm ,
Medium Alarm , Low Alarm , Remote Alarm , Alarm Watch , or
Key .
4 Under Audio , touch On .
Note:
You may not be able to adjust the volume. Contact your system administrator
for more information.
5 Use the slide control to adjust the volume. For higher volume, move the slide
to the right, and for lower volume, move the slide to the left.
To disable an audio tone
1 Touch Monitor Setup .
2 Touch the Audio tab.
3 Touch the tone that you want to turn off: High Alarm , Medium
Alarm , Low Alarm , Remote Alarm , Alarm Watch , or Key .
4 Under Audio , touch Off .
Audio Off Reminder
By default, the control to turn off audio is not available to the clinician. Your system
administrator can select whether clinicians have access to turn off the audio. If
configured for access, you can turn on or off audio in the
Audio tab.
If you have access to turning the audio on or off, the system administrator also has
the option to turn on or off an audio tone reminder. If enabled, a reminder tone
sounds every 60 seconds and a reminder message is displayed for 20 seconds.
There are two types of reminders (refer to Figure 7-6 and Figure 7-7 on page 7-13).
If the SILENCE button is present, then you can silence the reminder tone and close
the reminder window by touching the button.
Figure 7-6 “Audio Off” Reminder Message