HELPLINE 0861 40 41 42 • www.spacetv.co.za
11
5.3 EDIT SATELLITE
The parameters of satellite, such as Orbital Position
and Transponders can be edited in this menu. All the
satellites will be listed in this menu.
Press [
/
] buttons to move cursor in list.
Press [F2] to edit the name or the orbital position of
current satellite in the menu. And then press [
/
]
to move cursor and [
/
] to change value of each
highlighted items in edit menu.
Press [F3] to add a new satellite. Press [F4] to enter the
delete satellite menu, and then press [OK] to confirm to
delete or press [MENU] to cancel.
Press [OK] to view the transponder list of current
satellite.
On transponder list menu, press [OK] or [F2] to edit
transponder. Press [F3] to add a new transponder. Press
[F4] to delete, press [OK] to confirm to delete or press
[MENU] to cancel. Press [OK] button to edit selected
transponder. And then press [
/
] to move cursor
and [
/
] to change value of each highlighted item
in edit menu.
5.4. SPECTRUM CHART
This menu will show the spectrum chart of a set
frequency range. Press [
/
]
to switch cursor focus
between Start Frequency, End Frequency, LNB Setting
and Current Frequency Mark.
