Spa Guts 6230Y Series, Руководство по эксплуатации для владельца

Страница: 13 / 16

12
NO, LOW OR SURGING WATER FLOW
Air Lock in Plumbing System - “Bleed” the system.
Restricted Flow - Insure that the water shut-off valves are open and that suction fittings
are not blocked by debris.
Dirty Filter - Clean or replace filter.
Low Water Level - Increase water level to recommended level.
NO LOW SPEED PUMP OPERATION
Low Level Programming Incorrect - Contact your local dealer.
Over-Temperature Protection On -
Refer to page 9
Pump Not Plugged-In - Plug in the Pump.
NO JETS OR BLOWER OPERATION
Blower or Pump Not Plugged-In - Plug in the Blower or Pump.
Over-Temperature Protection On - Refer to page 9
NO THERAPY JET OPERATION
Water Shut-Off Valves are Closed - Open Shut-Off valves.
Dirty Filter - Clean or replace filter.
Jets Not Properly Adjusted - Adjust Jets
Diverter Valve Not Properly Adjusted - Adjust diverter valve
Thermal Overload Tripping - Check for restricted flow of water.
Over-Temperature Protection On - Refer to page 9
NOTHING OPERATES
The following describes situations and possible solutions to common
problems you may encounter as a spa owner.
Main Breaker is OFF - Set to On.
Sub-Panel Breaker Off - Set to On.
Power switch in Off position - Set to On.
Component(s) not plugged in - Plug in components.
Power cord not plugged in - Plug in power cord.
Over-Temperature Protection On - Refer to page 9
TROUBLESHOOTING