5) Gently wipe toner, to do a disinfection of the skin and the best protection.
6) After clean skin, should analyze the nature and the issues to be addressed of
the skin, and then select the most appropriate creams, so as to achieve the
desired effect.
7) Evenly rub the selected cream on the face, the flexibility to rotate the probe,
too much will waste, too little will affect the operation.
8) Turn the power, select the corresponding socket connected to the ultra-sound
probe.
9) Press the power switch (POWER),adjusting the power transfer size
(INTENSITY). General use "power show", but still depends on everyone's skin,
depending on age and feel.
10) Adjust the appropriate time (TIMER), usually 15 minutes. Processing the
small parts, may be appropriate to reduce the time, too long will make the skin
fatigue and malabsorption.
11) Select the waveform (STATE), select the "continuous wave" (
∽
∽
∽
∽
), or "Pulse"
(
).
12) with the probe in the paint already on the skin cream massage, massage for
different parts of the distribution to be a good time, efforts should be uniform,
moving or rotating speed should be appropriate.
13) Using the probe massage on the skin with cream, massage for different parts
of the distribution in a appropriate time, force should be uniform, moving or
rotating speed should be appropriate.
14) After using ultrasound, should clean the probes.
15)If can select the appropriate mask with traditional Chinese medicine cover
the face, the skin feel more refreshing.
5
