Spa Builders AP-4 SYSTEM, Руководство по эксплуатации для владельца

Страница: 16 / 17

15
ORGANIC POLYMERS are used in
various forms. These chemicals clear up
cloudy or dirty water appearance and
prevent calcium deposits on the inside
spa finish, plumbing and heating
equipment. Use as recommended by the
manufacturer.
METAL GON or its equivalent is a
chemical that will prevent iron in the spa
water from staining the spa finish. This
chemical is added to the spa water when
the spa is filled for the first time or when
refilled. Use as directed.
SILICONE EMULSION quickly and
effectively disperses foam and is
completely compatible with the other
chemicals listed. Use as required.
POLISHES AND SEALERS are usually
silicone compounds that provide
effective protection and a glossy finish
to the inside surfaces of the spa. It
should be applied after the surfaces have
been cleaned with a mild, non-abrasive
cleaner. Rinse well with clean water
then apply polish using a soft cloth
following the directions (should be done
every time the spa water is changed.)
SPA WATER should be changed
periodically depending upon frequency
of usage and other conditions that may
affect water usability. Typically 60 to
90 days is a satisfactory interval under
normal conditions. With heavy usage,
the interval between water changing
should be less.
SPA FILTER CARTRIDGE should be
cleaned every 2-4 weeks depending on
the frequency of use. Rinse the filter
cartridge with a pressure hose and re-
install filter cartridge in filter housing.
When changing spa water it is good practice to soak the filter cartridge in
filter cleaner. The filter cleaner is
specially made to remove accumulation
of oils and other contaminates which
will ensure good, sanitary water and
extended filter cartridge life.
ADDING CHEMICALS to your spa
water: Add to the center of the spa with
the pump and the air blower (bubbles)
operating simultaneously. Make sure the
water is heated. Never add chemicals to
cold water, as this will affect chemical
action, also never add chemicals directly
into the skimmer.
IT IS DESIRABLE to protect the wood
skirt around your spa from water stain.
This can be done by applying a clear
wood finish to function as a sealant. If
necessary, to clean and prepare the
surface before sealing, use a wire brush
and work with the grain to remove as
much staining as possible.
Store all chemicals in a cool, dry place
and in such a way as to prevent children
and pets from contacting.
SPA MAINTENANCE