© Copyright 2019 SP01 Design.
All rights reserved.
S P Ø 1 D E S I G N . C O M
p. 7
TOP ASSEMBLY
PLACE THE TOP WITH THE HOLES FACING DOWN ON THE TABLE STRUCTURE.
CENTRE THE FIRST HOLE OF THE TOP WITH THE HOLE IN THE METAL DISK AND FIX IT USING THE
PROVIDED SCREW. THEN PROCEED ALIGNING AND FIXING THE OPPOSITE SCREW. FINISH BY INSERTING
THE REMAINING SCREWS.
TIGHTEN ALL THE SCREWS GRADUALLY MAKING SURE THAT EVERYTHING IS FIXED IN A UNIFORM
MANNER.
ATTENTION: THE WEIGHT OF THE TOP PLACED ONTO THE STRUCTURE CAN SLIGHTLY MOVE THE HOLE IN
THE STRUCTURE. YOU CAN RECENTRE THE HOLES BY SLIGHTLY LIFTING THE TOP.
PARISI TABLE
1
2
3
4
