14
1. Battery In-Vehicle
2. Out Of-Vehicle
3. Review Data
4. Print Data
5. System Setup
Main Menu
BATTERY OUT-OF-VEHICLE TEST
The SP61062 battery tester activates once the clamps have been correctly connected and
automatically enters the battery test program. It will display the following content in a sequence,
select accordingly.
BATTERY OUT-OF-VEHICLE
Battery OUT-OF-VEHICLE means battery is not
connected to the vehicle at all.
Select UP/DOWN key to select the battery out
of vehicle. Then press the ENTER key to
confirm.
SELECT BATTERY TYPE
The tester will now prompt you to choose a
battery type, i.e. Regular Flooded, AGM Flat
Plate or AGM spiral, Gel and EFB battery.
Press the UP/DOWN key to select a battery
type, and then press the OK key to confirm.
BATTERY SYSTEM STANDARD AND RATING
The SP61062 battery tester will test each battery according to the selected system and rating.
Use UP/DOWN key to select according to the actual system standard and rating marked on the
battery. Use UP/DOWN key to select according to the actual system standard and rating marked
on the battery. See in the below picture, the arrow indicated location.
•
CCA: Cold Cranking Amps, specified by SAE&BCI, most frequently used value for starting
battery at 0°F (-18°C).
•
BCI: Battery Council International standard
•
CA: Cranking Amps standard, effective starting current value at 0°C
•
MCA: Marine Cranking Amps standard, effective starting current value at 0°C.
1. Regular Flooded
2. AGM Flat Plate
3. AGM Spiral
4. GEL
5. EFB
Battery Type
