SP Scientific VirTis BenchTop Pro Series, Руководство оператора, Страница: 11 / 66

Rev 002, 01/14 3
© SP Scientific 2014
Chapter
2
Installation and Startup
Initial Inspection
Inspect the contents of your shipment immediately upon arrival. Check packing
material for possible small accessory items. DO NOT ACCEPT damaged shipments
from a carrier without a signed notification of damages.
If concealed damage and/or loss is discovered, contact the freight carrier immediately.
Keep the contents, packing material and related paperwork intact until the written
report is obtained.
Note: SP Scientific will cooperate in the matter of collecting your claim, but shall not assume
responsibility for the collection or free replacement of the material. When possible, replacement
parts shall be shipped and invoiced to you, making them a part of your claim.
Lifting Instructions
If no damage was discovered following the initial inspection of the BenchTop Pro unit,
make sure that two (2) individuals are available to safely lift the unit. The BenchTop
Pro should be lifted by the metal frame near the unit’s four (4) feet, not by the front
panel.
WARNING! THE BENCHTOP PRO WEIGHS UP TO APPROXIMATELY
131 LBS (59.4 KG). ALWAYS PRACTICE TEAM LIFTING WHEN MOVING
HEAVY EQUIPMENT.
Lift Here Lift Here
Do Not Lift at
Front Panel