SP Scientific Freezemobile Series Скачать руководство пользователя страница 5

Rev 005, 02/12 

 

iii 

© SP Scientific 2012 

Warranty Information (VirTis Lyophilizers) 

VirTis Freezemobile 25L and 35L Lyophilizers are is warranted by SP Scientific to be free of defects in 
material and workmanship when operated under normal conditions as specified in the instructions 
provided in this manual. Please take this opportunity to locate the serial tag on your new VirTis 
Freezemobile 25L and 35L and record the information below for future reference. SP Scientific also 
recommends that you complete and return your unit’s warranty registration card. 
 
Model Number 

 

 

 
Serial Number 

 

 

 
Part Number 

 

 

 

 

 

Limited Warranty 

 

SP Scientific (the “Company”) warrants each of its products against any defects in material or 
workmanship, provided that the product is used in a reasonable manner under appropriate conditions and 
consistent with the applicable operating instructions, for a period of 12 months from the date of installation 
or 15 months from the date of shipment (whichever comes first). 
The obligation of the Company shall be, at its option, to repair or replace, without charge any parts that 
prove to be defective within the warranty period, if the purchaser notifies the Company promptly in writing 
of such defect. The Company shall not be responsible for labor charges payable with respect to persons 
other than Company employees. Replacement or repair of parts pursuant to this warranty shall not in any 
way extend the original warranty period. The Company will not be responsible for any unauthorized 
repairs, replacements or product modifications, nor will it be responsible for any product failures resulting 
from such unauthorized repairs, replacements or product modifications negligently or otherwise made by 
persons other than Company employees or authorized representatives of the Company. 
THE COMPANY DOES NOT MAKE AND EXPRESSLY DISCLAIMS ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY, 
EXPRESSED OR IMPLIED, WITH RESPECT TO THE SALE, INSTALLATION, DESIGN OR USE OF ITS 
PRODUCTS. ADDITIONALLY, THE COMPANY SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF OR ANY DEFECTS IN ITS PRODUCTS. 
The Company’s employees are available to provide general advice to customers concerning the use of 
the Company’s products; however, oral representations are not warranties with respect to particular 
products or their uses and may not be relied upon if they are inconsistent with the relevant product 
specifications for the items set forth herein. 
Notwithstanding the above, the terms and conditions set forth in the Company’s formal sales contracts 
shall be controlling and supersede any inconsistent terms contained herein, and any changes to such 
contracts must be made in writing and signed by an authorized executive of the Company. 
 

 

 

 

 

 

 
 
 

 

Содержание Freezemobile Series























































Отзывы: