SOYO SY-D6IGA, Руководство пользователя и техническое описание, Страница: 22 / 120

Hardware Setup SY-D6IGA
18
Your board comes with four DIMM sockets, providing support for up
to 2GB of main memory using DIMM modules from 8MB to 512MB.
Use only 8ns (100MHz, PC100 compliant) or faster memory.
Memory Configuration
Number of
Memory Modules
DIMM 1 DIMM 2 DIMM 3 DIMM 4
1 1
st
2
1
st
2
nd
3
1
st
2
nd
3
rd
4 1
st
2
nd
3
rd
4
th
RAM Type
SDRAM
Memory Module
Size (MB)
8/16/32/64/128/256/512 Mbytes
Notice 1: 256 & 512 MB memory modules only available on PC registered DIMM.
Notice 2: Always install memory modules in the order prescribed in this table.
Notice 3: Do not install unbuffered and registered memory modules together.
Important: It is of prime importance that you install DIMM
modules as outlined in the table above in order to preserve
signal integrity on 100MHz front side bus systems.
Step 3. IDE Device Installation (HDD, CD-ROM)
This motherboard offers two primary and secondary IDE device
connectors (IDE1, IDE2.) It can support up to four high-speed HDD
or CD-ROM.
Connect one side of the 40-pin flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the motherboard.
This motherboard can support up to four HDDs.