SY-6IZM/3
Quick Start Guide
7
Hardware Installation
Step 2.
Make Connections to the Motherboard
This section tells how to connect internal peripherals and power supply to the Motherboard.
Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan,
Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock
Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on how to connect internal and external peripherals to your new SY-6IZM/3
Motherboard, please refer to
SY-6IZM/3 Motherboard User's Guide and Technical
Reference
online manual on CD-ROM.
Connectors and Plug-ins
IrDA (Infrared Device Header): IR1
Wake-On-LAN Header: JP44
Pin1
Pin2
Pin3
Pin4
Pin5
Pin1
Pin2
Pin3
VCC
None
IRRX
GND
IRTX
5VSB
GND
MP-Wakeup
CPU Cooling Fan: CPUFAN
Chassis Fan: CHAFAN
Pin1
Pin2
Pin3
Pin1
Pin2
Pin3
GND
12V
SENSOR
GND
12V
SENSOR
Power LED
Keylock
Pin1
Pin2
Pin3
Pin1
Pin2
5V
NC
GND Control Pin
GND
Speaker
Pin1
Pin2
Pin3
Pin4
5V
NC
NC
Speaker out
HDD LED
Turbo LED
PWRBT
RESET
Pin1
Pin2
Pin1
Pin2
Pin1
Pin2
Pin1
Pin2
LED Anode
LED
Cathode
LED
Cathode
GND
Power
On/Off
GND
Power Good GND
CD Line-in: J4, J5
Pin 1 Pin 2 Pin 3 Pin 4
J4
R
G
L
G
Connect the CD Line-in cord from the CD-ROM
device to the matching header J4 or J5.
J5
R
G
G
L
ATX Power On/Off: PWRBT
ATX Power Supply: ATX PW
Connect your power switch to this
header (momentary switch type).
To turn off the system,
please press this switch and
hold down for longer than
4 seconds.
Attach the ATX Power cable to this connector.
When using the Power-On by PS/2 Keyboard
function, please make sure the ATX power
supply can take at least 720mA load on the 5V
Standby lead (5VSB) to meet the standard ATX
specifications.
1
1
1
1
1
1
1
Power LED Key Lock
Speaker
Reset PWRBT Turbo LED HDD LED