manualshive.com logo in svg

SOYO LI-7000, Руководство пользователя, Страница: 33 / 95

Поделиться
Скачать
SOYO LI-7000 Скачать руководство пользователя страница 33

Motherboard’s Hardware Installation

LI-7000

29

(1).

 

Universal Serial Bus USB1/USB2

This Motherboard provides two USB ports for your additional devices.

Plug the USB device jack into the available USB connector USB1 or

USB2.

-

 

Standard device drivers come with the Win98 for commonly used

USB devices.

-

 

With Win95, use the flow UHCI specifications.

(2).

 

Onboard Joystick port/audio

This Motherboard provides Joystick port and audio.

-

 

Attach the joystick cable to the 15-pin JOYSTICK port at the rear

panel of you motherboard.

-

 

This Motherboard features three built-in audio-stereo ports (labeled

line-in, line-out, and mic jack) convenient to directly plug-in all your

external audio devices.

(3).

 

 IR Module

Your case has a build in IR transceiver, connected to the motherboard

through this header. It supports both the ASKIR and HPSIR specifications.

USB

LINE-OUT

LINE-IN

MIC JACK

IR Module

To 7IWL-T Motherboard

Содержание LI-7000
































































































Отзывы:

Нет отзывов