4
Recommended Use
Read all these instructions and save them for later use.
Follow all warnings and instructions on the product.
Do not open or remove covers. Refer all servicing to qualified service personnel.
Do not block the vent holes on the case.
Do not insert sharp objects or spill liquid into the LCD monitor through slots. They may
cause accidental fire, electric shock or failure.
Disconnect the power plug from the AC outlet if you will not use the monitor for an
indefinite period of time.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks.
Do not touch the screen directly with your fingers or apply pressure on the screen. You
may damage the screen.
Use the type of power indicated on the marking label.
Do not remove any of the prongs of the monitor s three-pronged power plug.
Cautions
Immediately unplug your monitor from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the monitor.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet damaged.
•
If the monitor does not operate normally by following operating instructions.
Do not allow anything to rest on the power cord.
Do not locate this product where people will walk on the cord.
Use the proper power cord with correct attachment plug type. If the power source is 120V
AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord
that meets the respective European country’s safety regulations, such as VDE for
Germany.
Do not overload wall outlets or power cords. Ensure that the total of all units plugged into
the wall outlet does not exceed 10 amperes.
