4. INSTRUCTIONS
4.1 Power ON
1. Under “Power OFF” mode, Press and hold the TALK button for at least 6 seconds until 2
beeps are heard.
2. Green LED flashes 5 times rapidly for a few times.
3. The Bluetooth headset is now turned ON. Green LED will flash once every 3 seconds.
4.2 Power OFF
1. Under “Power ON” mode, Press and hold the TALK button for at least 3 seconds until 2
beeps are heard.
2. Red LED flashes 5 times rapidly for a few times
3. The Bluetooth headset is now turned OFF.
4.3 Pairing
Before you can use the BEH009 Bluetooth headset function, you must pair it first. To pair the
BEH009 Bluetooth headset function with the mobile Phone or Audio Gateway device, you
need to:
1. Turning the BEH009 Bluetooth headset OFF
2. Press and hold the TALK button for 9 sec. The two LEDs would cross-flash RED/GREEN,
then release the TALK button.
3. The BEH009 Bluetooth headset function is now in pairing mode and is ready to be paired
with a Bluetooth-enabled device. (Please refer to the instructions provided by
Bluetooth-enabled device to do the pairing process.)
4. The default passkey of BEH009 is ‘0000’ .
5. When pairing success, Green LED flashes every 3 seconds, it means BEH009 under
standby mode, user may accept calls. If the LEDs still cross-flashes RED/GREEN, it
means the pairing was failed. You need to go back to Step 1 and pair again.
4.4 Answering incoming calls
When a ring tone be heard at the earphone. Press TALK button to answer the call.
4.5 Transfer a call
During a phone call, hold Volume Up (+) Button and release it when hear a beep sound) to
transfer the call from headset to mobile phone
4.6 Reject a call
During a ring, hold Talk Button and release it when hear a beep sound to reject the call.
