32
BIOS Setup
On Board Parallel Port
Choose from: Auto, Disabled, 378, 278,
or 3BC.
Auto:
Set the parallel port to an IO
address automatically.
Disabled: Disable the onboard parallel
port and the parallel port
options below will not be
available for change.
Parallel Port Mode
Choose from: Normal, Bi-Dir, EPP, or
ECP.
EPP Version
If EPP is selected rom the above option,
choose either 1.7 or 1.9 version here.
Parallel Port IRQ
Choose either IRQ 5 or 7 for the parallel
port.
Parallel Port DMA
Channel
Choose either DMA channel 1 or 3 if
appropriate.
K/B Wake Up Function
Set this option to
Enabled
to enable the
Keyboard Wake Up function.
Mouse Wake-up
Function
Set this option to
Enabled
to enable the
Mouse Wake Up function.
Onboard IDE
Set this option to
Both
for normal use. If
need to disable the onboard IDE
controllers, choose from the following:
Disabled, Primary (disable secondary),
Secondary (disable primary).
Hardware Monitor
The hardware Monitor allows you to monitor your system variables, such
as temperature, FAN speed, and voltages, all can be monitored through
this page. There are no settings that can be changed on this page.
Supervisor Password
The main difference between the User and Supervisor Password is that
the Supervisor Password allows access to all BIOS settings, however on
