Soyo Computer SY-7IWM, Быстрый старт, Страница: 9 / 26

SY-7IWM & SY-7IWM/M Quick Start Guide
9
Hardware Installation
Step 3.
Configure Memory
Your board comes with three DIMM sockets, and provides support up to 512MB main
memory using DIMM modules from 8MB to 256MB.
Memory Configuration Table
Number of
Memory Modules
DIMM 1 DIMM 2 DIMM 3
1
Double-sided/
Single-sided
Double-sided/
Single-sided
2
Double-sided/
Single-sided
Single-sided Single-sided
RAM Type SDRAM
Memory Module Size (MB) 8/16/32/64/256 Mbytes
Note: PC100 Compliant DIMM module is required regardless of 66 or 100 MHz
FSB speed.
Step 4.
Set J6 &JP2 to configure CPU FSB Frequency
Manual Mode Description
J6 JP2
Open J6
Short pin
1-2
Set power up FSB frequency to 66MHz if the user
wants to run the CPU at a FSB frequency of
66MHz. Only 66~83MHz FSB can be set in the
BIOS.
“SPORT” Mode Description
J6 JP2
Open J6
Short pin
2-3
Set Power up FSB frequency to 100MHz if the user
wants to run the CPU at an FSB frequency of
100MHz or higher. This setting will allow the user to
run the CPU at a higher FSB frequency, especially
when the user wants to run a 66MHz FSB CPU at
100MHz and higher FSB frequencies.
Note : The “SPORT” mode setting facilitates FSB over-clocking. Doing so will however force
your CPU to operate out of its specifications, and therefore SOYO can not guarantee the
proper function of your system.
1 2 3
1 2 1 2 3
1 2