Soyer BMS-4 Akkumat, Руководство по эксплуатации

Страница: 20 / 32

BMS-4 Akkumat
20
Insert connecting plug of the external battery charger into the connecting
socket located at the stud welder’s front panel.
Use mains cable to connect external battery charger to power supply.
Ensure correct connected loads for electrical
connections as indicated on the type plate and/or
battery charger.
The LED "Supply voltage on" lights up when power is supplied via the
external battery charger.
The accumulator is automatically charged. The LED "Supply voltage on"
lights up at the stud welder to check proper operation. The LEDs 1.6 -
1.8 show the state of charge.
The current state is indicated by a light-emitting diode located on the
external battery charger.

Red LED: Charge with maximum charging current

Green LED: Accumulator is fully charged

Please also refer to the instruction manual of the
external battery charger.