manualshive.com logo in svg

Soyer BMS-10N, Руководство по эксплуатации

Поделиться
Скачать
Soyer BMS-10N Скачать руководство пользователя страница 45

10-35

Transport and storage

R

10

Transport and storage

The stud welder has a robust metal housing. Owing to the electronic compo-
nents it should be ensured, however, that transport is free from vibrations.

The stud welders BMS-10N and BMS-10NV have two handles at the side for
transport and mobile use within short distances.

These carrying handles are intended for transport by hand only.

☞

Never pull ropes through these handles to lift the system by
crane to the installation site. The system would become unstable
and might tilt from its original position. As a result the handles
could rip and the system fall on the ground.

DANGER TO HEALTH

Prevent unauthorized use of the stud welding system by children and
unqualified personnel.

After long system standstill, we recommend having the stud

☞

welder checked by a SOYER

®

 serviceman prior to initiation.

Содержание BMS-10N






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды