Soyea B628-350, Быстрый старт

Страница: 4 / 6

Getting Started
1 Insert a proper SIM card into the SIM card slot.
2 Connect the router's power adapter to a power supply. The router will then start up automatically and
connect to the Internet.
3 Connect your Wi-Fi device to the Wi-Fi network of the router. For the default Wi-Fi name and
password, refer to the nameplate on the router. If you are using a computer, connect the computer to
the LAN port of the router using a network cable.
4 Log in to the web-based management page to manage your router, such as for changing the Wi-Fi
name or password. For details about the default IP address and login password, refer to the
nameplate on the router.
Overview
1
LAN/WAN port
•
Connect a LAN device to the router to access the Internet, such as
a computer or switch.
•
Connect the router to a wall-mounted Ethernet port for Internet
access.
2
WPS button
When Wi-Fi is enabled, press to enable the WPS connection.
If you accidentally pressed the WPS button and the Wi-Fi
indicator starts to flash, wait for it to stop flashing. This
may take about two minutes.
3
Power indicator
Steady green: The router is powered on.
Flashing green: The router is restoring to factory settings.
4
Wi-Fi
®
indicator
Steady on: Wi-Fi is enabled.
Flashing: A device that can be paired is detected. Press the WPS
button on the router, the Wi-Fi indicator will flash faster, and the device
will connect to the router's Wi-Fi network.
5
Signal strength
indicator
Steady green: Strong.
Steady yellow: Moderate/Weak.
Steady blue: Connected to Ethernet network.
Steady red: Not connected to network.
6
Reset button
When the router is powered on, use a needle-type object to press and
hold the Reset button, until the power indicator starts to flash. Release
the button, and the router will restore to its factory settings.
7
Power button Press and hold to power the router on or off.
Safety information
Learn more about our latest Safety Information at https://www.soyea-tech.com.
•
Ideal temperatures: 0°C to 40°C for operating, -20°C to +70°C for storage.
•
Avoid using the device in a dusty, damp, or dirty place, or near a magnetic field.
•
Unplug the power adapter from electrical outlets and the device when not in use.
•
For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily
accessible.
•
Please consult your doctor and the device manufacturer to determine if using your device may
interfere with the operation of your medical device.
•
Ensure that the power adaptor meets the requirements of Annex Q of IEC/EN 62368-1 and has been
tested and approved according to national or local standards.
•
Warning: This equipment may not work when mains power fails.
1