SOYAL
ACCESS CONTROL SYSTEM
®
AR-821EF / AR-821EV
V091028
DO
MT
or
P1
P2
P3
P4
P1
P2
P3
P4
P1
P2
P3
P4
1
2
A.
B.
Contents
AR-821EF [Fingerprint]
AR-821EV [Finger Vein]
2
User Guide
2
User Guide
Installation
Use a screwdriver to screw the mounting plate to the wall.
Pull cables ends through the access hole in the mounting plate.
Attach AR-821EF or AR-821EV to the mounting plate and install screws (supplied) into the
holes at the bottom with the allen key (supplied).
Apply power. LED (green) will light up with one beep.
1
Products
1
Products
3
Terminal Cables
3
Terminal Cables
4
Allen Key and Screws
4
Allen Key and Screws
Notice
1. Tubing:
The communication wires and power line should not be housed in the same electrical conduit or tubing.
They should always be installed in separate tubes.
2. Cable selection:
Use AWG 22-24 “Shielded Twisted Pair” to avoid star wiring.
3. Power supply:
Do not connect the reader and lock to the same power suppy. While the lock activates, it will cause the reader’s power to be unstable
and affect the readers operation. The standard connection of power supply is to have the door relay and the lock use one supply;
the reader uses an independent supply.
Connector Table
Wire Application
Door Relay
Common-COM-Point
Door Sensor
Exit Switch
Alarm Relay
Power
Wire Application
Tamper Switch
Wire Application
Networking
Wiegand
Buzzer
LED
Wire Application
Serial Port
Description
(N.O.)DC24V1Amp
(N.C.)DC24V1Amp
(COM)DC24V1Amp
Negative Trigger Input
Negative Trigger Input
N.O./N.C. Optional
(by jumper)
DC 12V
DC 0V
Description
N.C.
COM
N.O.
Description
RS-485 (B-)
RS-485 (A+)
WG DAT: 1 Inpu
ABA Clock Input
WG DAT: 0 Input
ABA Data Input
Buzzer Output 5V/100mA, MAX
LED Green Output 5V/20mA, MAX
LED Red Output 5V/20mA, MAX
Description
Signal Ground
TTL Serial Data Output in
4800, N, 8, 1
Color
Blue White
Purple White
White
Orange
Purple
Gray
Thick Red
Thick Black
Color
Red
Orange
Yellow
Color
Thick Green
Thick Blue
Blue
Green
Pink
Brown
Yellow
Color
Black
Blue
Wire
1
2
3
4
5
6
7
8
Wire
1
2
3
Wire
1
2
3
4
5
6
7
Wire
1
2
P1.
P3.
P2.
P4.
Front Panel & Indicator
Power
(Green)
Busy
(Red)
Alarm
(Red)
Card Present/ Arming
(Green)
OK
(Green)
Error
(Red)
Fingerprint or Finger-Vein
Scan Area
