8
4.2. External Cleaning
Wash the outer cabinet with warm soapy water. Do NOT use abrasive
products. There may be sharp edges on the underside of the product, so care
should be taken when cleaning. Once or twice a year dust the rear of the
appliance and the compressor at the back of the appliance, with a brush or
vacuum cleaner, as an accumulation of dust will affect the performance of the
appliance and cause increased energy consumption.
4.3. Defrosting
If ice build up in the ice-box exceeds 3-5mm, empty the contents and switch off
the appliance, leave the door open and allow the ice to melt.
Do not use sharp
objects to scrape the ice away.
Clean and dry the interior, close the door and
turn on the power to the appliance. When the power has been restored the
appliance will start to operate but it may take some time to achieve the pre-set
operating temperature.
4.4. When the appliance is not in use
When the appliance is not in use for long periods, remove the contents,
disconnect from the electricity supply and clean the appliance, leaving the door
ajar until you wish to use the appliance again.
4.5. Changing the Interior Light Bulb
Switch off the power supply to the appliance
Unscrew the bulb from the rear of the light unit.
Replace the bulb with a suitable replacement.
Refit the cover and switch the appliance back on.
