ORIGINAL INSTRUCTIONS
ORIGINAL INSTRUCTIONS
6
7
1. Roller
2. Dirt wiper
3. Bottom shaft
4. Push bar
5. Bolt
6. Nut
7. Pin
NOTE! You will need 8mm,13mm and 14mm
open-ended wrenches for the assembly work.
1. Remove all parts of the lawn roller from the
box and carefully remove all packaging.Take
care not to lose any instructions which may be
information which will be required while
assembling the lawn roller.
2. Keep all packaing until the lawn roller
is fully assembled and has been operated
successfully.
NOTE! Always recycle the packaging in
accordance with local recycling schemes.
PREPARING TO ASSEMBLE THE
LAWN ROLLER
Note: Before using the roller, read the
instruction book carefully.
OPERATING
INSTRUCTIONS
1. Connect the dirt wiper with the right&left
reference.
WARNING! Always take care when
removing the packaging to prevent
damage to you or to the lawn roller.
ASSEMBLE THE LOWER HANDLES
Before using the lawn roller ,a one-time
assembly is required.
1. Insert the left lower handle (3) onto the
shaft (1) of roller as illustrated in Fig A, and
2. Do the same on the other side.
Fig. A
CONNECTION THE DIRT WIPER
WITH LOWER HANDLES
Connect the upper handles with lower handles
CONNECTION THE UPPER
HANDLES
1
3
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk