20
The cutting system must be kept in good condition and
inspected before and after use. Switch off the motor
before you carry out any inspections of the cutting system.
Remember that the cutting head will continue to turn for a few
seconds after the motor has been switched off. Never attempt
to stop the cutting head.
Check plastic cutters for wear and replace when necessary.
Plastic cutters should be straight, replace if bent or twisted.
Place the mains lead in loops on the ground near the wall
socket. Mow away from the socket and cable and ensure that
the mains lead is always on the section of lawn that you have
already mowed, so that you do not run over the mains lead
with the mower.
If you see the grassbox is full whilst you are mowing, you
should stop the mower and empty the grassbox.
Mowing advice
Keep the underside of the mower casing clean and remove all
grass deposits from it. Deposits make it more difficult to start
the mower and also adversely affect the mowing quality and
the grass collection.
