16
PALLET LIFT TRUCK MANUAL
Oil change
Draining the oil:
1. Bring the unloaded forks down to the lowest position.
2. Remove the oil tank by taking off the eight (8) clips on the pump and removing
the tank.
3. The oil can now be drained and the tank cleaned.
Oil filling:
4. Fill oil through the filling hole on the tank.
5. Oil quantity: 1.5 quarts. Use 10W non-detergent motor oil.
6. Fill oil to the bottom arrow (LogiLift) on the tank.
7. Refit the filling cap and bleed the system.
Lubrication and hydraulic oil
Under normal operation conditions the Pallet Lift Truck requires no lubrication.
All ball bearings are sealed and lubricated for life, and moving parts have self-
lubricating bearings or are treated with molybdenum disulphide grease.
The hydraulic system is filled with hydraulic oil of viscosity (class ISO VG 32. ) non
detergent 10W motor oil. An additive is added to the oil: Wynn’s Hydraulic Sy-
stems Concentrate.
The concentrate reduces friction and wear and protects against corrosion.
Pre-mixed hydraulic oil with additive is avaiable from the dealer. The oil is suitable
for use in the temperature range 14° to 120° F. A thinner oil is recommended for
temperatures lower than 14° F (if necessary, contact your dealer).
Bleeding the hydraulic system
With a load of 110 - 220 lbs, the forks must be raised and lowered to top and bot-
tom position 2-3 times.
