14
Southworth Products
PalletPal 360 Manual
4.3 Installing & Removing Secondary Springs
1. Lift up on black clip-lock
2. Rotate the yellow bayonet and clip-lock assembly
counter-clockwise until the tabs of the bayonet line up
with the slots on the platform frame.
On Range 0 machines there is a small
screw located in the platform that will
prevent the bayonet from rotating. This
bolt will need to be removed before the
bayonet can be removed.
3. Lift up on the bayonet and clip-lock assembly until clear of the platform frame. Set
assembly aside.
4. The springs can now be removed or added through the
bayonet hole as needed.