8.5H x 5.5”W
1
2
TABLE OF CONTENTS
Important Safety Information..................................................2
Description of Operation........................................................3
Identification...........................................................................3
Operating Instructions......................................................4- 15
Maintenance..........................................................................16
Specifications ........................................................................17
Warranty...........................................................................19-20
BEFORE OPERATING THIS TOOL, READ AND
UNDERSTAND ALL OF THE INSTRUCTIONS
AND SAFETY INFORMATION IN THIS MANUAL
SAFETY FIRST
Safety is essential in the use and maintenance of Southwire Contractor
Equipment. This instruction manual and any markings on the tool
provide information for avoiding hazards and unsafe practices
related to the use of this tool. Observe all of the safety information
provided in this manual.
These symbols are used to call attention to potential
hazards or unsafe practices that could result in injury
or property damage. The three safety words defined
below indicate the severity of the hazard.
The message after the signal word provides
information for preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
SAFETY
ALERT
SYMBOLS
Personal
safety hazards
Read and understand all of the
• Only qualified persons should use a Maxis
®
XD10 EXTREME Duty Puller.
• Wear eye protection and a hard hat when
using this tool.
• Wear hand protection while using this tool.
• Do not use tool while tired or under the influence
of drugs, alcohol, or medication.
• Keep body parts and loose clothing away from
moving parts.
• Always follow proper and customary safety
procedures for operating equipment of this nature.
• Keep clear of rope pulling path of travel as rope
breakage could result in personal injury or death.
instructions and safety information in
this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT
IN SEVERE INJURY OR DEATH
• Using excessive force may result in personal injury or damage to the tool.
If excessive force is required to complete a pull, verify there are no obstructions or that
the wire pull calculations are acceptable and does not exceed the capacity of the tool.
• Make sure to wear proper eye protection and stand clear of rope pulling path.
CAUTION
Electrical Shock Hazards
• This is not an insulated tool, contact with live circuits could result in severe injury or death.
