Tester Description
Cable Tester Top View
2. TEST button
3. POWER LED
4. Detachable Remote
1.
2.
3
4
5. RJ45 Jack
Patch Cables
(Two included)
1. RJ45
Jack
4-5
M555TP
TEST
POWER
T568A
T568B
7-8
3-6
4-5
7-8
3-6
4-5
4-5
REVERSA
L
PAS
S
SHO
RT
7-8
3-6
S
7-8
3-6
4-5
7-8
3-6
4-5
REVERSAL
PASS
SHORT
7-8
3-6
S
Detachable Remote
Bottom View
1. LEDs indicate the wiring
status of each pair on a
four pair data cable.
2.
LED verifies shield integrit
y
on shielded cables.
1. Connect one end the cable under test to the RJ45 port on the tester.
2. Detach the remote from the bottom of the tester.
3. Connect the other end of the cable under test to the RJ45 port on the remote.
4. Momentarily press the
TEST
button.
5. If all four pairs on a data cable are properly wired,
the LEDs for each pair will flash green in the sequence
shown below:
If the LEDs flash out of the sequence, the wire pairs are miss-connected
at one end of the cable. If an LED does not flash or flashes red,
the corresponding pair is miswired.
WARNING:
Never test a cable that is connected to live equipment.
Exposure to voltage can damage the tester.
Operation
Testing a Data Cable Terminated with RJ45 Connectors
Detachable
Remote
Tester
4-5
M
555
TP
TES
T
POW
ER
T568
A
T568
B
7-8
3-6
4-5
7-8
3-6
1-2
3-6
4-5
7-8
SS
