Page 4 of 9
Copyright 2011 Southwestern Microsystems Inc. All rights reserved.
Connect this wire to the positive (+) terminal
–
RED handle
on the
Elegant Music System (left of right side doesn
’t matter) and to the
positive (+) terminal
–
RED handle
on the speaker. See picture on
next page
o
We recommend always using the silver colored wire or copper colored
wire
with white stripe
on insulation jacket as the negative (-) conductor.
Connect this wire to the negative (-) terminal
– BLACK handle on
the Elegant Music System (left of right side doesn
’t matter) and to
the negative (-) terminal
– BLACK handle
on the speaker. See
picture below.
o
Using some wire staples, carefully retain wire to wall.
o
Select
MONO
using switch on rear panel.
Elegant Music System Rear Panel
Speaker Rear Connections
Speaker wire
connectors Red (+) &
Black (-).
12V DC power jack.
Use only supplied
power adapter.
iPod / Auxiliary input jack.
Uses 3.5mm male stereo
plug (same on most
headphones). Cables are
available from us.
Spring loaded ring for easy
mounting of a speaker on a
wall. Use a threaded wall
hook. Note - Be gentle when
pulling plastic loop out to
capture hook as it can break.
Speaker wire
connectors Red (+) &
Black (-).
18 gage 2 conductor
speaker wire.
