Prepare By: Dreamis So
P.12
2/13/04
Installation
Box Contents
Before installing your phone, check the shipping carton to be sure you have the
following:
l
Base Unit
l
Quick Installation Guide
l
Long Telephone Line Cord
l
DC Adaptor with Cord
l
Remote Access Card
l
Owner’s Manual
l
Handset with Rechargeable Battery
l
Belt Clip
l
Wall Mount Stand
Notes:
a. Keep the shipping carton and packaging, in case you need to ship your phone.
b. If there is visible damage, do not use this equipment. Contact your shipping agent or
return the telephone to the place of purchase.
Preliminary Preparation Telephone Line Installation
1. Never install telephone jack during a lightning storm.
2. Never install telephone jack in wet location unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
Modular Outlet
The GH5811 Cordless Telephone operates from a standard 110/120 volt AC outlet. The
handsets are powered by a rechargeable battery pack. Batteries are charged automatically
when the handset is placed in the cradle of the base unit or charging unit.
Table/Desk Installation
A. Plug one end of the long telephone line cord into the back of the unit and connect the
other end to a modular wall jack. Press until locking lever clicks.
B. Connect the DC Adaptor into the back of the unit. Plug the other end into a standard
110/120 volt AC outlet.
C. Keep antenna length on base fixed for best reception.
D. Place the handset into the base unit. The handset will beep, and the CHARGE LED
will light. The LCD display will show “Initialization” for 2 minutes and then return to
standby mode. During these 2 minutes, user can pick up the phone and operate it in
standby mode.
NOTE: BATTERY PACK MUST BE CHARGED FOR 16 HOURS BEFORE INITIAL
OPERATION.