General Information
UNPACKING
This package contains:
• FM2555 speakerphone with Caller ID/Call Waiting
• Owner's manual
• One (1) desk mount bracket
• One (1) fully modular coil cord
• One (1) Long fully modular telephone line cord (long straight cord)
• One (1) Short fully modular telephone line cord (short straight cord)
• One (1) Quick Reference Guide
• Warranty Card (part of Owner's manual)
If anything is missing or damaged, contact the place of purchase. Keep the
packaging to transport the telephone.
HELPFUL TIPS FROM CUSTOMER SERVICE
1. You must subscribe to Caller ID and Call Waiting service from your local
telephone company for your FM2555 to operate.
2. Remove the "peel off label" covering the FM2555's display.
3. Plug one end of the telephone line cord into the TELEPHONE LINE jack on the
FM2555 and the other end into the modular outlet in your telephone wall jack.
4. Plug the AC Power Adapter into the FM2555 before connecting it to the wall outlet.
5. Make sure you can read the display clearly. Adjust the display contrast by pressing
and holding Review " " and " " buttons at the same time for 2 seconds. Press scroll
" " and " " to select the contrast. Press ERASE to confirm the contrast.
Installation
CAUTION
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the incoming
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
Note: Refer to "FCC Requirements" section on page 22 before connection to
telephone line.
8
